Top series wave soldering design si degitalized, module defined, and human-oriented, it shows superiority in function, performance, stability, reliability, safety, maintainability, operability and humanization. It can not only reduces customers’ operation cost, and also provides an effective guarantee in quality and quantity during production. It is the “Peak work” of wave soldering industry and the preferred brand for customer investment.
1. Closed Loop control with Inverter control system to keep the stability and accuracy of speed managed.
2. The transmission structure adopts double row column quick change claw, and has strong adaptability to various PCBs.
3. With independent temperature control in 4 Pre-heating zones that can insure to achieved the best heat-efficiency.
4. Modularization high efficiency pre-heater is convenience for maintanance, attained powerful heat and long life.
5. The nozzle is right angle according to rail always to ensure the flux can good penetrate the PCB through holes.
6. Solder wave can be started automatically according to the PCB’s conveyor. Height of dancer wave and laminar wave are controlled separately by inverter.
7. Circular arc appearance, environmental protection design.
8. PC and PLC controller constitute a perfect and stable control system
9. Powerful software features, PCB board online temperature measurement, and at any time to print and save the temperature curve, easy to learn control software, a few minutes can learn to operate.
10. Special aluminum alloy guide rail, high hardness and high strength, no deformation when the temperature is high, the wear resistant copper strip in aluminum, to ensure that the titanium claw in the process of friction is not damaged.
11. The step motor drives the spray to move on the linear guide rail, the speed is accurate, the noise is small, and the utility model is suitable for frequent work and long service life.
12. Nozzles imported from Japan, high manufacturing precision, super atomization effect.
13 Spray system is equipped with automatic adding flux device to reduce the working intensity of the operator, to save the cost of the use of labor costs.
14. All stainless steel to preheat the area of the liner, the four section of hot air preheating, independent PID temperature control, heating stability, uniform, suitable for bulk over board.
15. Tin by external thermal heating, temperature control using PID mode, temperature control accuracy is ±2 ℃.
16. Double wave furnace adopts stepless speed control, independent control of wave height, Two waves designed closely..
17. Tin automatic import, automatic lifting.
18. Furnace liner, nozzle and screw all the tin are made of titanium alloy, the corrosion prevention of lead-free solder.
19. Automatic claw device, high quality micro pump.
|Model No.||JAGUAR N450|
|Number of heating zones||4 individual bottom preheating zones|
|Length of heating zones||2000mm|
|Preheating method||Hot Air|
|Preheating power||4KW/ zone|
|Control method||PC +PLC|
|Range of temp. control||Room temperature—300ºC|
|Conveyor motor||3ph 380v 60w 3ph 380v, 90w|
|Preheating time||About 10-15mins for setting 150ºC|
|Spray method||Stepper motor and slider moving sprayer|
|Solder pot capacity||450KG|
|Solder pot temperature||300ºC|
|Solder pot material||316 Stainless steel / Ti / cast iron enamel|
|Solder temp. control method||PID&SSR|
|Melting time||80 minutes|
|Conveyor angle||4-7 º|
|Flux pressure/capacity||3-5 bar/6.5L|
|Finger type||Dual hook|
|Solder pot heater||Cast iron|
|Finger cleaning pump||1PH 220V 10W|
|Solder pot lift up & down/ in & out||Manual/ automation optional|